How to Fix WiFi Bugs After Windows 10 Update?


Do you have upgraded your PC or laptop to Windows 10? Are you now experiencing any network problems and can’t connect to the internet? Stay here and know how you can fix no WiFi available after windows 10 update.

Microsoft revealed its ultimate major operating system named ‘Windows 10’ to almost 190 countries last week. It was the biggest hit, as the new operating system was installed by 14 million users within first 24 hours. Unfortunately, a lot of users have reported that there are various bugs in Windows 10, such as the new version stuck in black screen, PC boot-up speeds slowing to an awful crawl, and no sound on Window 10 etc. Currently, many users encounter troubles in getting connected to the internet like No internet connection including Wi-Fi is not available when you upgrade Windows 8.1, 8 or 7 to Windows 10 or even no Wi-Fi adapter is found in the computer system after Windows 10 upgrade.

Why Wi-Fi Not Available after Windows 10 Update?

According to Microsoft, these network connection bugs are caused by two important factors which are mentioned in below;

  1. In Windows 10, the Wi-Fi or the wireless adapter driver is not updated, therefore, it is not compatible with the latest Windows. Hence, in some cases, the Wi-Fi driver is also missing after the recent update.
  2. Another reason of no Wi-Fi available in Windows 10 is unsupported VPN software, particularly when you reinstall Wi-Fi drivers. So, if you’ve Cisco VPN client, Sonic Global client or any other VPN software running on your PC, uninstall it before upgrading the brand new version.


How to Fix WiFi issues after Window 10 Upgrade?

Luckily, there are some working solutions to fix network connection issues after installing the Windows 10 on some different kinds of computers like Dell, Sony, HP, Asus, Lenovo, Toshiba, LG, Samsung, IBM, MSI, Microsoft, Alienware, Acer, Gateway, and Compaq etc. Here’s one of the best ways to fix the Wi-Fi bugs in Windows 10. Let’s follow the steps and get Wi-Fi working again in the newest Windows!

Step 1:

First off, simply right-click the Start button and choose ‘Command Prompt (Admin)’ to launch it.


Step 2:

Type the following command and press the Enter Key:

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f


Step 3:

Now enter the below-mentioned command into the Command Prompt and hit the Enter key:

netcfg -v -u dni_dne


Step 4:

Then, restart your PC and check back with Wi-Fi settings. Now, you’ll be able to see and connect all networks around you.


How to Optimize Wireless Adapter Settings for Best Wi-Fi Performance?

If you’re experiencing that your WiFi connection is slow, you can change the wireless adapter power setting to enjoy the high-speed internet. The default power option is ‘Power Saving mode’, which might become a cause of Windows 10 Wi-Fi issue while connecting to distant WAPs. So, follow the below-mentioned steps and fix the Wi-Fi issue!

Step 1:

Press ‘Windows Key + S’ and select ‘Power Options’.


Step 2:

Check out the recent plan of your computer (‘Balanced’) and then click on ‘Change plan settings’.


Step 3:

Choose ‘Change advanced power settings’.

Step 4:

Select ‘Maximum Performance’ under ‘Wireless Adapter settings’.


Step 5:

And now, Click ‘Apply’, and then click ‘OK’.

Leave a Reply